With a shallow vacuum bed this former requires a much lower vacuum draw down than most on the market today. In many cases you can easily pull a vacuum with a pump with a rating as low as 3 cfm. Made with PVC frame, support base and stand legs, this former will provide many years of heavy duty work. Membrane is held firmly in place with 60 Neodymium magnets ensuring a tight fit with a well sealed draw down.
We’ve increased the size from previous models from 17.5in x 26in to 19in x 26in. A little more size goes a long ways. Plus, we’ve now added additional corner bracing to provide even more rigidity.
- (1) pvc framed vacuum former
- (1) 19 in x 26 in Silicone membrane
- (60) All magnets needed for top and bottom membrane frames
- (1) Vacuum draw down rope
- (3) 3/4 in hinges (assembled)
- (1) 1/4 in ply draw down board surface
- (1) lift handle (assembled)
- (1) 3/4 in draw down elbow (assembled)
- (1) 22 in draw down rope
- Support stand legs (assembled)
Note: we do not provide a vacuum pump or any vacuum hose or additional fittings. You will need to source vacuum hose, fittings and vacuum pump based on your specific needs. Have a look at a recommended Vacuum pump here. Please allow a 7 day turnaround time on all orders placed and verify your shipping address to help avoid any delivery delays.